Microcomputed tomography analysis of curved root canal preparation when coronal flaring and glide path files used with heat-treated nickel titanium rotary files.

The objective was to evaluate the effect of glide path and coronal flaring on the dentin volume removal and percentage of touched walls in curved canals using two heat-treated rotary files. The mesiobuccal canal of forty-eight, randomly selected, extracted mandibular molars was divided into two groups of 24 each, according to the type of instrument used (RACE EVO and EdgeSequel rotary files). Each group was further divided into three subgroups; Group (A): Control using one file shaped to 04/30, Group (B) with a glide path (EdgeGlidePath (EGP)), and Group (C): with a glide path and coronal flaring (EGP and EdgeTaper Platinum (ETP) SX file respectively). The root canals were then instrumented using the assigned instruments. The assessment was carried out using micro-CT. The comparison of the mean values of the tested groups about dentin volume removal and percentage of untouched walls did not reach statistical significance (p<0.05). Glide path and coronal flaring had an insignificant effect on the dentin volume removal and percentage of untouched walls in curved canals.

Micro-computed tomographic evaluation on the quality of single-cone obturation using a modified passive-deflation sealer injection needle: an in vitro study.

OBJECTIVES: This study aimed to design a modified passive-deflation sealer injection needle and investigate its ability to improve obturation quality of single-cone technique through assessing the distribution of voids in root canals using micro-computed tomography (micro-CT). MATERIALS AND METHODS: Forty-eight mandibular incisors were divided into eight groups (n = 6), according to the taper of root canal preparation (0.06 or 0.04), the needle used for sealer injection (modified or commercial iRoot SP injection needle), and the obturation method (iRoot SP sealer-only or single-cone obturation). After obturation, each specimen was scanned by micro-CT. The volumetric percentage and distribution of all voids were first analyzed and compared among groups, then the open and closed voids were separately analyzed and compared among single-cone obturation groups. RESULTS: Compared to commercial needle groups, modified needle groups showed much less voids, especially in the apical root canal part (P < 0.05). Besides, the modified needle groups produced much less open voids than commercial needle groups despite the root canal taper (P < 0.05). CONCLUSIONS: The modified passive deflation sealer injection needle could effectively improve the quality of single-cone obturation through reducing intra-canal voids, especially open voids throughout the root canal, thus might possibly be developed as an effective intra-canal sealer delivering instrument.

[Comparison of the ability of four different kinds of nickel-titanium instruments to prepare simulated resin to simulate curved root canal forming].

PURPOSE: To compare the forming ability of four kinds of nickel-titanium instrument preparation resin for simulated curved root canal. METHODS: A total of 40 single bend resin simulated root canals were randomly divided into 4 groups with 10 in each group. Four kinds of nickel-titanium instruments (ProTaper, HyFlex EDM, WaveOne Gold and Reciproc Blue) were used for root canal preparation, and divided into group A, group B, group C and group D. The preparation time of the four groups was compared, the root canal images before and after preparation were analyzed by computer image analysis software, and the changes of the preparation time, curvature and curvature radius of the four groups were recorded. With the root tip as the center of the circle, the radius of 1-10 mm was selected as concentric circle arcs. The detection points were overlapping root canal intersection points. The resin removal amount and center positioning force of the inner and outer walls of the root canal at different detection points were recorded. Statistical analysis was performed with SPSS 20.0 software package. RESULTS: The root canal preparation time in group A was significant longer than that in group B, C and D(P＜0.05), but there was no significant difference in the curvature and curvature radius of the root canal among the four groups (P＞0.05). The removal amount of resin from the root canal wall in group C was significant lower than that in group A, B and D (P＜0.05) when the distance from the detection point to the apical foramina was 5, 6, 8, 9 and 10 mm, respectively. The removal amount of resin from the outer wall of the root canal in group C was significant lower than that in group A, B and D (P＜0.05) when the distance from the detection point to the apical foramina was 5, 6, 7, 9 and 10 mm, respectively. The root tip offset of group A from the detection point to the apical hole of 1, 2, 3, 4, 6, 7, 8, 9 and 10 mm was significant greater than that of group B, C and D(P＜0.05). CONCLUSIONS: Among the four instruments, ProTaper has the largest apical deviation, HyFlex EDM, WaveOne Gold and Reciproc Blue have better ability of root canal forming.

Postendodontic Pain Using Single File System with Different Irrigation Protocols in Single-visit Root Canal Treatment: A Randomized Control Trial.

AIM: To evaluate the intensity of postendodontic pain (PEP) using final irrigation with side-vented needle (SV), EndoActivator (EA), and Ultra X (UX) in single-visit endodontics (SVE) with F-One rotary files. MATERIALS AND METHODS: A total 150 patients indicated for endodontic treatment were selected. Single-visit endodontics treatment was performed under local anesthesia. For the final irrigation protocol, they were divided into three groups: group I (SV), group II (EA), and group III (UX). The severity of PEP was assessed using visual analogue scale (VAS) score after 6, 12, 24, and 48 hours. Analgesics taken by patients, for pain, were also recorded. Finally, the data were tabulated and statistically analyzed using SPSS 20.0 software at a level of significance being 0.05. RESULTS: Postendodontic pain was less in group III (UX) and group II (EA) compared with group I (SV) at 6 and 12 hours, which is statistically significant (p < 0.05). There was no statistically significant difference found after 24 hours and 48 hours. CONCLUSION: The intensity of PEP was minimum in patients treated with EndoActivator and ultrasonic along with single rotary file systems. The incidence of analgesic intake was similar in all three groups. How to cite this article: Kathiria NV, Attur K, Bagda KM, et al. Postendodontic Pain Using Single File System with Different Irrigation Protocols in Single-visit Root Canal Treatment: A Randomized Control Trial. J Contemp Dent Pract 2024;25(2):180-185.

Computational fluid dynamics investigation on the irrigation of a real root canal with a side-vented needle.

BACKGROUND: Root canal therapy is one of the main treatments for root canal diseases, and effective irrigation is the key to successful treatment. Side-vented needle is one of the commonly used needle types in clinic. In the real root canal, due to the influence of the curvature of the root canal, the irrigation flow field in different needle directions shows obvious differences. At the same time, changes in root canal curvature and working depth will lead to changes in irrigation efficiency and the flow field. Both the mainstream of the irrigation flow and the shear stress near the wall changes significant. Consequently, either the replacement in the root canal or the removal efficiency of the smear layers is apparently modified. MATERIALS AND METHODS: In this paper, the permanent root canal of the maxillary first molar prepared until 15/04 were scanned by micro-CT, and then imported into the software for 3D reconstruction. The key parameters of flushing efficiency of 30G side needle at different working depths of 4.75 mm, 5 mm, 5.25 mm and 5.5 mm were compared. Meanwhile, the simulated models with different curvatures of 0°, 5°, 10°, 20° and 30° based on the real root canal were reconstructed to investigate the curvature effect on the irrigation efficiency. RESULTS: The results show that moderate working depth (such as 4.75 mm and 5.25 mm in present paper) helps to improve the replacement capacity of irrigation flow. At the same time, the apical pressure decreased as the working depth increased. The curvature of the root canal seriously affects the removal depth of the smear layers of the root canal. A root canal with a large curvature (especially 20° and 30°) can significantly improve the difficulty of irrigation. CONCLUSIONS: (1) Moderate working depth helps to improve the displacement capacity, the ERD of the irrigation flow is generally improved at the working depths of 4.75 mm and 5.25 mm, and the apical pressure will decrease with the increase of working depth. (2) The large curvature of the root canal can significantly improve the difficulty of irrigation. The curvature of the root canal can severely influence the removal depth of the smear layer on the wall. It can be found both the span and the depth of the ESS for little curvatures (5° and 10°) root canals are higher than those for large curvatures (20° and 30°).

Activation of endodontic irrigants using a 9.3 µm CO2 and diode lasers: A laboratory proof of concept model.

PURPOSE: To investigate the differences between irrigant propagation and temperature changes using laser-activated irrigation (LAI) at different settings in an artificial root canal model. METHODS: Using an artificial resin root canal model, irrigant activation was achieved in 19 experimental groups with eight samples each. A 9,300 nm CO2 laser, two diode lasers with different settings (wavelengths 455, 808, 970, and 980 nm) were compared to 2,940 nm Er:YAG laser and traditional needle irrigation. Er:YAG and CO2 laser were activated in the pulpal chamber only, while diode lasers and needles were inserted into the main root canal. Lasers were activated for 5x 20 seconds resulting in 100 seconds of activation or rinsing for each sample. After each activation of 20 seconds, a photo was taken of the side canals and the propagation of the dye was measured with a digital measuring tool after calibration. Further, the temperature of the irrigant was reported after activation of 20 seconds and repeated 5 times. Data were checked for normality and statistically compared. RESULTS: All lasers increased the irrigant propagation compared to conventional irrigation. Significant differences were found between groups regarding propagation and temperature (P< 0.0027). Er:YAG and CO2 laser had similar effects on irrigant propagation in middle and apical located side-canals with specific power parameters and were superior to diode lasers and syringe irrigation. The irrigant's temperature increased significantly with the diode and CO2 lasers. CLINICAL SIGNIFICANCE: Diode lasers and CO2 lasers have not been established for irrigant activation. 9,300 nm CO2 lasers absorb well in water and were shown to introduce vapor bubble formation and streaming in water. Diode lasers are highly accepted in periodontics. The laser light is not absorbed in water but interacts with bacteria as well as soft tissues and contributes therefore to infection control. With a modified laser tip it was however possible to introduce cavitation and streaming in irrigants.

Comparing accuracy in guided endodontics: dynamic real-time navigation, static guides, and manual approaches for access cavity preparation - an in vitro study using 3D printed teeth.

OBJECTIVES: To assess root canal localization accuracy using a dynamic approach, surgical guides and freehand technique in vitro. MATERIALS AND METHODS: Access cavities were prepared for 4 different 3D printed tooth types by 4 operators (n = 144). Deviations from the planning in angle and bur positioning were compared and operating time as well as tooth substance loss were evaluated (Kruskal-Wallis Test, ANOVA). Operating method, tooth type, and operator effects were analyzed (partial eta-squared statistic). RESULTS: Angle deviation varied significantly between the operating methods (p < .0001): freehand (9.53 ± 6.36°), dynamic (2.82 ± 1.8°) and static navigation (1.12 ± 0.85°). The highest effect size was calculated for operating method (ηP²=0.524), followed by tooth type (0.364), and operator (0.08). Regarding deviation of bur base and tip localization no significant difference was found between the methods. Operating method mainly influenced both parameters (ηP²=0.471, 0.379) with minor effects of tooth type (0.157) and operator. Freehand technique caused most substance loss (p < .001), dynamic navigation least (p < .0001). Operating time was the shortest for freehand followed by static and dynamic navigation. CONCLUSIONS: Guided endodontic access may aid in precise root canal localization and save tooth structure. CLINICAL RELEVANCE: Although guided endodontic access preparation may require more time compared to the freehand technique, the guided navigation is more accurate and saves tooth structure.

Root canal curvature influences uncontrolled removal of dentin and cleaning efficacy after ultrasonic activation.

This study evaluated the correlation between root canal curvature and the effects of ultrasonic irrigation in the following parameters: volume of uncontrolled dentin removal (UDRVol), maximum depth of dentin defects, removal of accumulated hard tissue debris (AHTD), and canal transportation in prepared curved root canals. Twenty-four human permanent mandibular molars were divided into two groups according to root canal curvature: moderate curvature (MC: mean 25°); and severe curvature (SC: mean 48°). The specimens were scanned using an X-ray microcomputed scanner (Skyscan 1172) before and after cleaning and shaping and after the final irrigation protocol with ultrasonic irrigation. There was a moderate correlation between the degree of root canal curvature and the volume of remaining AHTD (p<0.05) and between the degree of root canal curvature and maximum depth of defects due to uncontrolled removal of dentin (p<0.05). The teeth in the SC group had a greater maximum depth of defects on the dentin wall in the apical third than the teeth in the MC group (p <0.05). Both groups had a significant reduction of AHTD in all canal thirds, but the amount of remaining AHTD in the middle and apical thirds and the whole canal was significantly greater in the SC than in the MC group (p <0.05). Canal transportation was not influenced by the canal curvature in all thirds (p >0.05). This study concluded that root canal curvature affects significantly the uncontrolled removal of dentin and remaining AHTD volume after the final irrigation protocol with ultrasonic irrigation.

Formation of dentinal microcracks after root canal preparation with four kinds of mechanical nickel-titanium files.

OBJECTIVES: This study aimed to compare the differences among four kinds of mechanical Ni-Ti files including T-Flex, Reciproc Blue (RB), ProTaper Gold (PTG), and ProTaper Universal (PTU) in dentinal microcrack generation after root canal preparation in vitro by using micro-computed tomography (micro-CT) analysis. METHODS: A total of 32 freshly extracted double-root-canal premolars with an angle not exceeding 10° were selected and established as root canal preparation models in vitro. Then, the specimens were randomly assigned to four experimental groups (n=8) according to the different Ni-Ti systems used for root canal preparation: group T-Flex, group RB, group PTG, and group PTU. The voxel size of the micro-CT was set at 17.18 µm. Pre- and post-operative cross-sectional images of roots (n=56 940) were scanned and analyzed to identify the presence of dentinal microcracks. The results of each group were expressed by the quantity and percentage of sectional images with microcracks. McNemar test was used to determine whether a significant difference existed in the existence of dentinal microcracks before and after instrumentation. The level of significance was set at P<0.05. RESULTS: Overall, 11.04% of the images presented dentinal defects (n=6 288). Dentinal microcracks were observed in 9.82%, 10.79%, 12.27%, and 11.25% of the post-instrumentation images from groups T-Flex, RB, PTG, and PTU, respectively. However, all these dentinal microcracks were already present in the corresponding pre-operative images. No new microcrack of premolars were generated after the root canal preparation utilizing the aforementioned systems. CONCLUSIONS: Denti-nal microcracks already existed in advance in extracted teeth before root canal preparation. Root canal preparation using the T-Flex, RB, PTG, and PTU systems did not induce the formation of new dentinal microcracks on the straight root canals of premolars.

In vitro efficacy of Er:YAG laser-activated irrigation versus passive ultrasonic irrigation and sonic-powered irrigation for treating multispecies biofilms in artificial grooves and dentinal tubules: an SEM and CLSM study.

BACKGROUND: Multispecies biofilms located in the anatomical intricacies of the root canal system remain the greatest challenge in root canal disinfection. The efficacy of Er:YAG laser-activated irrigation techniques for treating multispecies biofilms in these hard-to-reach areas has not been proved. The objective of this laboratory study was to evaluate the effectiveness of two Er:YAG laser-activated irrigation techniques, namely, photon-induced photoacoustic streaming (PIPS) and shock wave-enhanced emission photoacoustic streaming (SWEEPS), in treating multispecies biofilms within apical artificial grooves and dentinal tubules, in comparison with conventional needle irrigation (CNI), passive ultrasonic irrigation (PUI), and sonic-powered irrigation (EDDY). Two types of multispecies root canal biofilm models were established in combination with two assessment methods using scanning electron microscopy (SEM) and confocal laser scanning microscopy (CLSM) with the aim to obtain more meaningful results. METHODS: Ninety extracted human single-rooted premolars were chosen for two multispecies biofilm models. Each tooth was longitudinally split into two halves. In the first model, a deep narrow groove was created in the apical segment of the canal wall. After cultivating a mixed bacterial biofilm for 4 weeks, the split halves were reassembled and subjected to five irrigation techniques: CNI, PUI, EDD, PIPS, and SWEEPS. The residual biofilms inside and outside the groove in Model 1 were analyzed using SEM. For Model 2, the specimens were split longitudinally once more to evaluate the percentage of killed bacteria in the dentinal tubules across different canal sections (apical, middle, and coronal thirds) using CLSM. One-way analysis of variance and post hoc multiple comparisons were used to assess the antibiofilm efficacy of the 5 irrigation techniques. RESULTS: Robust biofilm growth was observed in all negative controls after 4 weeks. In Model 1, within each group, significantly fewer bacteria remained outside the groove than inside the groove (P < 0.05). SWEEPS, PIPS and EDDY had significantly greater biofilm removal efficacy than CNI and PUI, both from the outside and inside the groove (P < 0.05). Although SWEEPS was more effective than both PIPS and EDDY at removing biofilms inside the groove (P < 0.05), there were no significant differences among these methods outside the groove (P > 0.05). In Model 2, SWEEPS and EDDY exhibited superior bacterial killing efficacy within the dentinal tubules, followed by PIPS, PUI, and CNI (P < 0.05). CONCLUSION: Er:YAG laser-activated irrigation techniques, along with EDDY, demonstrated significant antibiofilm efficacy in apical artificial grooves and dentinal tubules, areas that are typically challenging to access.

Assessment of Incidence, Management and Contributory Factors of Root Canal Instrument Separation in an Endodontics Post- Graduate Program: A Retrospective Clinical Study.

BACKGROUND: The successful outcome of nonsurgical root canal treatment (NS-RCT) is largely dependent on the technical quality of the procedure. OBJECTIVE: To investigate the incidence of separated instruments in endodontic postgraduate clinics between January 2018 and December 2021, and to determine the potential contributory factors that increase the risk of instrument separation. MATERIALS AND METHODS: A retrospective observational study was conducted in the Department of Endodontics, Faculty of Dentistry, King Abdulaziz University, Jeddah, Saudi Arabia. Data was collected to determine the incidence of separated instruments and their associated variables. Seven variables were analyzed separately: nonsurgical initial or retreatment case, tooth type, tooth arch, tooth location, canal type, root curvature, level of fracture, and file type. RESULTS: A total of 3150 cases were treated, of which 108 cases had separated instruments. The overall incidence of instrument separation was 3.4% while 53.7% of separated instruments occurred in the mandibular molars, followed by 42.6% in the maxillary molars. The highest frequency of instrument separation was recorded in the mesiobuccal canal (35.2%). The level of separation was found to be statistically significant in relation to the management (P < .001). CONCLUSION: Nickel-titanium instruments tend to separate more inside the root canal system than stainless steel instruments. However, under the limitation of this study, the incidence of instrument separation is still quite low, even with postgraduate endodontic residents with limited experience.

Cleaning and disinfection of the root canal system provided by four active supplementary irrigation methods.

This in vitro study evaluated the bacterial reduction provided by the EndoActivator (EA), Easy Clean (EC), passive ultrasonic irrigation (PUI), and XP-Endo Finisher. Eight-four mesial roots of mandibular first molars were instrumented, inoculated with Enterococcus faecalis, and divided into four groups (n. 20). Bacterial reduction in the main canals and dentinal tubules were respectively determined by MTT assays and Live/Dead BackLight technique through confocal laser scanning microscopy (CLSM) at 50, 100, and 150 µm in-depth (n. 10 per group). Statistical analyses were conducted following a significance level of 95% (P < 0.05). A significant statistical difference was just identified between XPF and EC in the main canals. In the dentinal tubules from the main root canals, at 100 and 150 µm in-depths, significant statistical differences were only observed between XPF and EC (P = 0.027) for the former and between XPF and EC (P = 0.011) and XPF and PUI (P = 0.021) for the latter. In the dentinal tubules from the isthmus, at 100 µm in-depth, statistically relevant differences did occur between XPF and EC (P = 0.038) and EC and EA (P = 0.029). At 150 µm in-depth, these differences were only significant by comparing XPF and PUI (P = 0.025) and XPF and EC (P = 0.036). Although no irrigation method could thoroughly disinfect the RCS, bacterial reduction indexes were generally better after using XPF.

The Effect of Different Obturation Techniques Using Different Root Canal Sealers on the Residual Filling Material After Retreatment Procedures.

BACKGROUND: This study aimed to compare the effect of different obturation techniques with root canal sealers on the residual filling material after retreatment using SEM. MATERIAL AND METHOD: Sixty (60) single rooted mandibular premolars were selected and instrumented with rotary files using the Mtwo system up to file size 30/.05 taper. The samples were randomly divided to two groups based on the type of sealer and three sub-groups (n=10) based on the obturating technique used. The root fillings were removed using the PTUR system files and the specimens were longitudinally sectioned while digital images were obtained from the root canals with SEM. The time required to reach working lenght were recorded. RESULTS: There was no difference in terms of the smear score when comparing both sealer and obturation technique groups in the apical third. Smear scores were significantly affected by the type of sealer and obturation technique in the medium and coronal thirds of root canals (p<0.05). Higher smear scores were obtained with GFB than AH Plus (p<0.05). The time required to reach working length with GFB was longer than AH Plus (p<0.05). CONCLUSION: Residual filling material was observed in all samples, regardless of the root canal sealer or the obturation technique used. There was a significantly lower smear scores in the AH Plus groups as compared to the GFB.

Final irrigation with bioglass solution in regenerative endodontic procedure induces tissue formation inside the root canals, collagen maturation, proliferation cell and presence of osteocalcin.

AIM: To evaluate the influence of an experimental solution of cobalt-doped F18 bioactive glass (F18Co) on tissue repair following regenerative endodontic procedure (REP) in rat molars. METHODOLOGY: The F18Co solution was prepared at a ratio of 1:5 F18Co powder to distilled water. The right or left upper first molars of 12 Wistar rats were used, where the pulps were exposed, removed, and irrigated with 2.5% sodium hypochlorite (NaOCl), followed by 17% ethylenediaminetetraacetic acid (EDTA) (5 min each). Subsequently, the molars were divided into two groups (n = 6): REP-SS and REP-F18Co, where they received a final irrigation (5 min) with saline solution (SS) or F18Co solution, respectively. Then, intracanal bleeding was induced, and the tooth was sealed. Untreated molars were used as controls (n = 3). At 21 days, the rats were euthanized, and the specimens were processed for analysis of mineralized tissue and soft tissue formation inside the root canal using haematoxylin-eosin. The presence and maturation of collagen were evaluated by Masson's trichrome and picrosirius red staining. Immunolabelling analyses of proliferating cell nuclear antigen (PCNA) and osteocalcin (OCN) were performed. The data were submitted to the Mann-Whitney U-test (p < .05). RESULTS: There was a similar formation of mineralized tissue in thickness and length in REP-SS and REP-F18Co groups (p > .05). Regarding the presence of newly formed soft tissue, most specimens of the REP-F18Co had tissue formation up to the cervical third of the canal, whilst the REP-SS specimens showed formation up to the middle third (p < .05), and there was higher maturation of collagen in REP-F18Co (p < .05). The number of PCNA-positive cells found in the apical third of the root canal was significantly higher in the F18Co group, as well as the OCN immunolabelling, which was severe in most specimens of REP-F18Co, and low in most specimens of REP-SS. CONCLUSION: The final irrigation with F18Co bioactive glass solution in REP did not influence mineralized tissue formation but induced soft tissue formation inside the root canals, with higher collagen maturation, and an increase in PCNA-positive cells and OCN immunolabelling.

Assessment of the Effect of Different Irrigation Protocols on the Penetration of Irrigation Solution into Simulated Lateral Canals (In Vitro Study).

OBJECTIVE: To compare the effectiveness of lateral canal irrigation penetration by conventional needle, passive ultrasonic, sonic endo activator, and Erbium laser (2780nm). METHODS: A total of 40 palatal roots of human maxillary first molars were collected and instrumented at a working length of 12 mm by an X1-X4 rotary Protaper Next system (Dentsply, Maillefer, Ballaigues, Switzerland) using the crown-down technique. Artificial lateral canals were made at 2, 4, and 6 mm from the apex on mesial and distal sides using an ISO rotary reamer (Dentsply, Maillefer, Ballaigues, Switzerland; #10 for mesial, #08 for distal). The samples were then cleared using methyl salicylate. A solution of black ink and normal saline was used as an irrigant for the root canal. The percentages of the penetration of the ink into the lateral canals were measured using a stereomicroscope (Q-Scope, Arnhem, The Netherlands) with the aid of program Image J. The Tukey test is used to assess the significant difference between intragroup and intergroup comparisons of different thirds, and the T-test is used to assess the significant difference between every two groups and for the mesial and distal sides of each group. The level of significance was set at 0.05. RESULTS: Results showed that none of the activation techniques used resulted in complete lateral canal penetrations; however, on both sides at all thirds, the Erbium laser (2780 nm) achieved the highest results with a highly significant statistical difference (p=0.05) with all other groups, and the least penetration was in the conventional needle group. CONCLUSION: The size of the lateral canal is a restricting factor for all activation methods; the best results can be achieved by laser. Conventional needles cannot be used alone to disinfect complex canal anatomy; however, passive ultrasonic and sonic endo activator activations can produce comparable results.

A laboratory study comparing the static navigation technique using a bur with a conventional freehand technique using ultrasonic tips for the removal of fibre posts.

AIM: There are currently no high-quality studies comparing the static navigation technique with conventional methods of fibre post removal. The aim of this ex vivo study was to compare the effectiveness of fibre post removal between a static navigation technique and a conventional freehand technique using ultrasonics by experienced and inexperienced operators. METHODOLOGY: Forty-eight extracted single-rooted human premolars were root-filled. A fibre post was cemented in all 48 teeth, which were then divided randomly into the following groups: static navigation group using burs; static navigation-ultrasonic group; and non-guided group using ultrasonic tips. The following parameters were evaluated for both experienced operators and inexperienced operators: reaching the gutta-percha root filling successfully, the time required to remove the entire post, the occurrence of lateral root perforations, and the amount of root dentine removed. The Kolmogorov-Smirnov test was used to examine the normality of the data; the anova test was used to compare the significant differences among groups; and Tukey tests were used for all two-by-two comparisons. The significance level was set at 0.05. RESULTS: In the static navigation group, the gutta-percha was reached significantly more frequently than in the non-guided group (p < .05). The static navigation approach required significantly less time than the non-guided approach to reach the gutta-percha (p < .05). The total removal of posts was significantly different between groups (p < .05), but there was no significant difference between experienced and inexperienced operators in the static navigation group (p > .05). More perforations were associated with the non-guided group than with the other two groups. The total mean loss of dentine in the non-guided group in all directions was 0.39 (±0.17) mm, with 0.25 (±0.09) mm for experienced, and 0.42 (±0.16) mm for inexperienced operators. CONCLUSION: When compared to a conventional ultrasonic technique for the removal of fibre posts, the static navigation method using burs resulted in less dentine removal, more rapid access to the gutta-percha root filling, less overall time to remove the posts, and fewer complications. When using static navigation, there was no difference in performance between experienced and inexperienced operators.

Extrusion bond strength and disinfection of E. faecalis from canal dentin using synchronized microbubble photodynamic activation and photon-induced photoacoustic streaming.

OBJECTIVE: This study aimed to assess the antimicrobial effectiveness of a new disinfection regimen Curcumin photosensitizer (CP), Synchronized Microbubble Photodynamic Activation (SYMPA), Photon-induced photoacoustic streaming (PIPS), and its impact on the extrusion bond strength (EBS) of root filling material to canal dentin. MATERIALS AND METHODS: Root canal treatments of sixty mandibular incisors were performed, and an overnight culture of E. faecalis was cultivated in the BHI medium. A volume of 1 mL was introduced into twenty root canals. All the samples were randomly allocated into 4 groups based on the irrigation used: -Group 1: 2.5% NaOCl+17% EDTA (Control), Group 2: CP+17% EDTA, Group 3: SYMPA+17% EDTA, and Group 4: PIPS+17% EDTA. The viable bacterial count was estimated, and 15 specimens from each group were obturated, followed by sectioning in 1-mm thick slices. The EBS was measured using a universal testing machine, and failure modes were analyzed using a stereomicroscope at 40x magnification. Means and standard deviations (SD) of the survival rate of E. faecalis and EBS of root filling to the dentin were analyzed using ANOVA Tukey multiple comparison t-tests (p=0.05). RESULTS: Group 1 (2.5% NaOCl+17% EDTA) demonstrated the highest survival rate of E. faecalis. Group 3, in which SYMPA+17% EDTA was used to sterilize the canal, unveiled the lowest survival rate (1.55±0.11 CFU/mL). Similarly, the coronal section of Group 3 specimens (8.67±0.43MPa) demonstrated the highest EBS. However, an apical section of Group 1 samples (2.81±0.11MPa) displayed the lowest outcome of bond integrity. Intergroup comparison analysis revealed that Group 4 (PIPS+17% EDTA) and Group 2 (CP+17% EDTA) samples demonstrated comparable values of bond integrity and bacterial survival. CONCLUSIONS: Canal disinfection using the synchronized microbubble photodynamic activation (SYMPA) technique proved to be a promising alternative technique in decreasing the count of E. faecalis and improving extrusion bond strength of gutta percha to canal dentin.

Influence of operator's experience on complications of root canal treatment using contemporary techniques: a retrospective study.

BACKGROUND: Endodontic treatment has benefited from the development of new techniques and equipment. Few clinical studies have been published on the complications associated with root canal preparations performed by doctors with different working experiences using contemporary techniques. This study aimed to analyze the complications of endodontic treatment performed by residents and endodontic specialists in a teaching stomatology hospital using contemporary techniques. METHODS: Cases of root canal treatment (RCT) and non-surgical root canal retreatment (ReRCT) performed by residents with 1-3 years of experience and endodontic specialists with 5-7 years of experience were collected from the electronic medical system of the Department of Endodontics, Beijing Stomatology Hospital, from September 1, 2020 to August 31, 2021. The cases were examined in terms of patient age, sex, type of tooth, diagnosis, treatment modality (RCT or ReRCT), number of appointments, whether an operating microscope was used, presence of ledges, canal transportation, perforations, missed canals, separated instruments, flare-ups and clinical incidence of second mesiobuccal (MB2) root canal in the maxillary molars. RESULTS: In total, 859 teeth from 820 patients were included in the analysis. The overall incidence of complications in the resident group was significantly higher than that in the specialist group. More ledges and flare-ups were observed in the resident group (p < 0.05). The clinical incidence of MB2 was significantly higher in the specialist group (p < 0.05). There were no significant differences in root canal transportation, perforation, or instrument separation between the two groups (p < 0.05). Multivariate analysis showed that the incidence of root canal preparation complications was related to operator experience, tooth type and treatment modality. CONCLUSIONS: Technical advancements could reduce the effect of working experience on RCT complications between residents and endodontic specialists in a teaching stomatology hospital.

Comparison of the removal of intracanal medicaments used in regenerative endodontics from root canal system using needle, ultrasonic, sonic, and laser-activated irrigation systems.

This study aimed to compare the syringe-needle irrigation (SNI), passive ultrasonic irrigation (PUI), EDDY, and shock wave-enhanced emission photoacoustic streaming (SWEEPS) techniques regarding calcium hydroxide and double antibiotic paste removal from the root canal in regenerative endodontic treatments. Eighty single-rooted human teeth were decoronated and enlarged up to #100 to stimulate the immature tooth model. Root canals were irrigated with 1.5% sodium hypochlorite followed by saline solution according to the regenerative endodontic treatment protocol. Dressed teeth were divided into 2 main groups regarding the used intracanal medicaments. Calcium hydroxide and double antibiotic paste were introduced to the canals, and teeth were stored for 3 weeks. Each medicament group was divided into 4 subgroups according to the activation techniques. Medicaments were removed using a 17% EDTA solution. Teeth were split longitudinally into two parts. The remaining medicaments were evaluated under a stereo microscope with a scoring system. Data were analyzed with the Kruskal-Wallis and Mann-Whitney U tests. Regardless of the used irrigation activation systems, there was no statistically significant difference between the removal of the CH and DAP from the root canal (P>0.05). While SWEEPS had the highest ability regarding the removal of intracanal medicaments, syringe-needle irrigation had the lowest (P<0.05). There was no statistically significant difference between PUI and EDDY (P>0.05). Complete removal of intracanal medicaments could not be achieved with any techniques. SWEEPS technology was more effective in removing intracanal medicaments in regenerative endodontic treatments compared to the sonic and ultrasonic irrigation activation systems.

Iontophoresis use for increasing drug penetration into root canals and dentinal tubules: A proof-of-concept study.

INTRODUCTION: The success of endodontic treatment depends on the significant disinfection of the root canal system, its irregularities, and dentinal tubules. However, achieving complete disinfection remains challenging, with frequent failures and occurrence of secondary infections. Here, we propose using iontophoresis to increase the penetration and distribution of disinfecting agents into root canals, using methylene blue for proof-of-concept. METHODS: The marker was applied in bovine root canals, and the radial distribution of the dye in the dentinal tubules was evaluated by optical microscopy. Iontophoresis was applied at 0.5 and 1.5 mA for 5 and 15 min. RESULTS: A significant statistical difference (p < 0.05) was observed in the marker penetration between passive and iontophoretic applications. Both current density and application time had an important effect on methylene blue distribution, with a greater efficacy delivery to the apical region achieved after 1.5 mA for 5 min or 0.5 mA for 15 min, showing longer application time can compensate for lower application current. CONCLUSION: Iontophoresis increases the penetration and distribution of methylene blue into bovine root canals and dentinal tubules, including its innermost portions. CLINICAL SIGNIFICANCE: Iontophoresis has shown to be a promising technique for root canal and dentinal tubule disinfection.